H1: PM Surya Ghar Portal Guide: Login, Application, Subsidy Status, and DBT Explained

PM Surya Ghar Muft Bijli Yojana is India's rooftop solar subsidy scheme for homes. Everything about it runs through one place: the PM Surya Ghar portal at pmsuryaghar.gov.in. You apply there, log in there to track progress, and the portal is where DISCOMs approve your installation before your subsidy goes out.

This guide walks through the whole process in order: how much subsidy you can get, how to apply, how to log in and check your status, how the payout actually reaches your bank account, and how vendors get listed on the platform.

H2: Who Is Eligible for the PM Surya Ghar Subsidy?

Not every household or every roof qualifies. Before you touch the application, check that you fit the basic criteria:

• You hold a residential electricity connection, commercial, shop, industrial, and agricultural connections don't qualify for this scheme.
• You own the property, or you have the owner's consent.
• Your connection hasn't already received a subsidy under this scheme or an earlier MNRE rooftop programme (Phase I/II), you can't claim it twice on the same connection.

H3: Can Tenants Apply?

Yes, with one condition: you need a No-Objection Certificate (NOC) from the building owner, on plain paper or e-stamp, and the electricity connection has to be in your own name as the applicant.

H4: Who Isn't Eligible?

Commercial and industrial properties don't get a central subsidy under PM Surya Ghar at all, it's residential-only. And if your specific connection already claimed a rooftop solar subsidy in the past (under this scheme or an earlier one), it can't claim again.

H5: How Much Subsidy Can You Get?

The subsidy scales with your system size, but only up to a point. The government pays:

• ₹30,000 for systems up to 1 kW
• ₹60,000 for systems up to 2 kW
• ₹78,000 for systems of 3 kW and above this is the cap

The subsidy scales with capacity up to 3 kW, then it's capped.

Install a bigger system and you'll pay more out of pocket, but the subsidy itself won't grow past ₹78,000. Most homes size their system around this 3 kW mark for exactly that reason it's where the subsidy math stops improving.

H3: Do States Add Extra Subsidy on Top?

Several states layer their own top-up on the central ₹78,000 (e.g., UP has offered an additional ₹15,000–₹30,000; Delhi, Maharashtra, and Gujarat run their own incentives).

H2: What are the documents required for solar subsidy?

Gather these documents before you start the application, having them ready in one folder speeds up every stage that follows.

• Electricity bill: your most recent bill, showing your consumer number and DISCOM name.
• ID proof: your Aadhaar card, in most cases. Some DISCOMs accept a PAN card instead.
• Property or ownership proof: something that ties you to the address on your bill, a registry document, a property tax receipt, or similar.
• Bank passbook or a cancelled cheque: the portal uses this to confirm the account your subsidy gets paid into later.

One rule matters more than any document on this list: your name has to match exactly across your Aadhaar, your electricity bill, and your bank account. Even a missing middle name or a different spelling triggers a rejection or stalls your payout, it's the single most common reason PM Surya Ghar applications get stuck. Fix any mismatch before you apply, not after.

H2: How Do You Apply for the Solar Subsidy?

Applying for the solar subsidy means working through the national portal in order you can't skip ahead to picking a vendor before your application and site approval are clear. Here's the sequence:

From portal login to the subsidy landing in your bank account.

1. Go to pmsuryaghar.gov.in and select "Apply for Rooftop Solar."
2. Choose your state and your electricity distribution company (DISCOM).
3. Enter your consumer number and electricity account number, then verify your mobile number with an OTP.
4. Fill in your profile name, address, and PIN code and save it.
5. Submit the rooftop solar application with your latest electricity bill, ID proof, and bank account details.
6. Wait for your DISCOM to approve feasibility. This confirms your roof and connection can support the system size you've asked for.
7. Once approved, pick a vendor registered with your DISCOM and get the system installed.
8. After installation, the DISCOM inspects the site and commissions your net meter.
9. Submit your bank details (if you haven't already) so the subsidy can reach your account.

The full cycle from application to a working, inspected system usually takes 4 to 8 weeks, depending on how quickly your DISCOM schedules inspections.

H2: How Do You Log In to the PM Surya Ghar Portal?

PM Surya Ghar login works entirely through OTP; there's no separate password to remember. Here's how it works:

1. Visit pmsuryaghar.gov.in and select Consumer Login.
2. Enter the mobile number you registered with, plus the captcha shown.
3. Enter the OTP sent to that number and submit.
4. You'll land on your dashboard, showing your application, its current stage, and any documents you still need to upload.

If the OTP doesn't arrive, double-check you're using the same mobile number tied to your application. A lot of failed logins come down to trying a second number by mistake.

H2: How Do You Check Your PM Surya Ghar Subsidy Status?

You can check your PM Surya Ghar subsidy status two ways: logging in, or tracking with just your application number.

• Through login: sign in with your mobile number and OTP, then open your dashboard. It shows exactly which stage you're at.
• Through the tracking page: enter your application number on the portal's public tracking page no login required.

Either way, your application moves through the same stages: registration, DISCOM feasibility, vendor selection, installation, net-metering, inspection, and finally subsidy processing. If your dashboard shows "Disbursement Initiated," the government has already triggered your payment it should land in your account within days, not weeks.

For status queries you can't resolve online, the toll-free number 15555 covers all PM Surya Ghar issues.

H2: How Does the Direct Benefit Transfer (DBT) Work?

Direct benefit transfer (DBT) is how the government actually pays you; it sends the subsidy straight to your bank account, with no middleman and no cash handling. Here's the sequence:

1. You pay the installer the full system cost upfront.
2. Your DISCOM inspects the site and commissions the net meter.
3. The portal confirms your bank account details, which must match your Aadhaar-linked account for the transfer to go through cleanly.
4. The Ministry of New and Renewable Energy releases the subsidy through DBT.
5. The amount lands in your account typically within 3 to 7 working days once disbursement starts, though the full process from inspection to credit can take 30 to 45 days.

Because DBT depends on your bank details matching your KYC exactly, a mismatched name or an inactive account is the single most common reason a subsidy gets delayed after everything else is approved.

H2: How Do Vendors Register on the PM Surya Ghar Portal?

PM Surya Ghar vendor registration happens in two layers: national portal enrollment, and separate empanelment with each state's DISCOM. Installers need both before they can appear as a selectable option for homeowners.

1. Go to the vendor portal at vendor.pmsuryaghar.gov.in and enter your company's PAN, then upload a scanned copy.
2. Add your organization details, GST number, business address, and contact information.
3. Choose your registration scope: state, multi-state, or national.
4. Upload your manpower and performance bank guarantee (PBG) details, along with technician credentials.
5. Verify your email and mobile number, each with its own OTP.
6. Separately, apply for empanelment with every DISCOM you plan to operate in.

National portal registration usually activates in 7 to 15 working days. DISCOM empanelment takes longer, 15 to 45 days, depending on the state. Vendors also need ALMM-certified solar modules and MNRE-approved inverters; installations using non-certified equipment can get rejected during DISCOM inspection.

H2: What Should You Do If a Step Gets Stuck?

Most delays trace back to one of three things: an OTP going to the wrong number, bank details that don't match your KYC, or a DISCOM inspection backlog. Before assuming something's broken:

• Confirm the mobile number on your application still matches the one you're using to log in.
• Check that your linked bank account is active and the name matches your application exactly.
• Call 15555 if your status hasn't moved in more than two weeks DISCOM-side delays are the most common holdup, and the helpline can usually tell you where in the queue you are.

H2: The Bottom Line

PM Surya Ghar isn't complicated once you see it as one continuous thread apply, get DISCOM approval, install with a registered vendor, and let DBT carry the subsidy the rest of the way. The parts that trip people up are rarely the big steps; they're the small mismatches: a bank account that doesn't match your KYC, a vendor who isn't actually empanelled with your DISCOM, an OTP going to the wrong number. Get those right upfront, and the ₹78,000 subsidy is really just a matter of waiting out the queue, not chasing a broken process.

H2: How ZEP360 Makes Solar Subsidy Paperwork Effortless

Every step in this guide comes with its own paperwork: the DISCOM feasibility form, the vendor installation report, the net-metering agreement, the bank verification document DBT needs. Most EPCs still fill these out by hand, per customer, per stage.

ZEP360's AI Document Generator removes that manual work entirely. Pull a customer's project into ZEP360, and the platform generates every document the PM Surya Ghar process requires: application forms, DISCOM submission paperwork, net-metering agreements, subsidy claim forms in a few clicks, with zero manual data entry. The AI pulls customer, site, and system details straight from your existing project record, so the same information never gets typed twice.

For an EPC running dozens of subsidy applications at once, that's the difference between a document taking 20 minutes and taking 20 seconds and fewer applications rejected over a mismatched form or a mistyped consumer number.

H2: Frequently Asked Questions

H3: Is a subsidy guaranteed once I apply?

No. The subsidy depends on DISCOM feasibility approval, a compliant installation using ALMM-certified equipment, and bank details that match your KYC. Applying starts the process and it doesn't guarantee the payout until every stage clears.

H3: Can I choose any solar installer?

No. You can only choose a vendor who's registered on the PM Surya Ghar portal and separately empanelled with your specific DISCOM. Installations by non-empanelled vendors don't qualify for the subsidy.

H3: How long does the entire process take, start to finish?

Budget 4 to 8 weeks for application through installation, plus another 30 to 45 days for the subsidy to reach your account after inspection faster if your DISCOM's queue is short and your bank details are already correct.

H3: Can tenants apply for the PM Surya Ghar subsidy?

Yes. Tenants can apply with a signed No-Objection Certificate (NOC) from the building owner, as long as the electricity connection is in the tenant's own name.

H3: Are commercial or rental properties eligible?

No. The central subsidy is residential-only. Shops, offices, factories, and other commercial or industrial connections don't qualify under PM Surya Ghar.

H3: Can I get the subsidy if I already installed solar under an earlier scheme?

No. If your connection already received a subsidy under PM Surya Ghar or an earlier MNRE rooftop programme (Phase I or II), that same connection can't claim it again.

H3: Do states offer additional subsidies on top of the central ₹78,000?

Some do. Several states run their own top-up incentives alongside the central subsidy check with your state's renewable energy department or DISCOM for what's currently available where you live.

H3: Why do PM Surya Ghar applications get rejected most often?

Four reasons account for most rejections: low-quality document scans (aim for at least 200 DPI, under 2MB, PDF or JPEG), panels not on the ALMM-approved list, an installer who isn't empanelled with your DISCOM, and a bank account name that doesn't exactly match your Aadhaar record.